MechanicalSample for creating and editing components
Part-Sample
These buttons allow the creation of solids via dialog. Generation of model deadlines via dialog, punctures, drilling predefined chamfers and much more.
Cylinder Dialog
With a selection of predefined rotationally symmetrical components, these can be generated in a fully defined manner using just 3 parameters. The desired final contour can be easily set by changing the dimensions. A dimensioning aid dialog makes it easier to enter dimensions.
Creation of punch punch DIN 9861 Form D by entering the diameter and length.
Cuboid Dialog
With a selection of predefined cubic parts, these can be created fully defined via dialogue with only 3 parameters. Optionally, the extrusion can be set in Y or Z direction. By changing the dimensioning, the desired final contour can be easily set. A dimensioning help dialogue facilitates the input of dimensions.
Hole Dialog
With a hole dialog, DIN-compliant holes M3 to M24 can be made in components. Thread pitches can be selected before generation.
Punctures
Creation of keyways according to DIN 6885 on shafts and in bores, according to the selected diameter. Angle, length and distance can be edited via dialogue.
The most important iFeatures can be called up via dialogue. Original planes are automatically switched on and off for selection.
Grooves for retaining rings according to DIN471 in shafts or bores. Automatic diameter recognition and geometric adjustment of the recess.
Creation of O-ring recesses hydraulically, pneumatically or statically in shafts or bores. Radii in the recess can be switched on or off.
Translated with www.DeepL.com/Translator (free version)
Model Tolerances
Generate predefined model tolerances easily via dialog. An individual fit entry of all available tolerances is possible.
Component levels
Origins and custom layers can be viewed and used together or separately by multiple clicks
